If you see discoloration, replace the part.
If you find a crack, do the applicable repair procedure.
Remove the tag.
Disconnect the cable from the rear side of the instrument.
These parts can easily bend, break or become incorrectly aligned.
The navigation lights change from dim to bright.
In this configuration, the hydraulic pressure bypasses the valve.
Move the lever rearward.
If the radio signal is not clear, adjust the frequency.
Corrosion can have many causes.
The user of the schematic diagram is the pilot.
Deactivation/Reactivation procedures for circuits, systems, units, etc., shall be included.
Documents must be readily revisable.
Install the manifold.
The control unit is installed aft of the cockpit.